{"id":322,"date":"2015-04-26T08:31:14","date_gmt":"2015-04-26T08:31:14","guid":{"rendered":"https:\/\/www.ukm.my\/imen\/?page_id=322"},"modified":"2015-04-26T08:31:14","modified_gmt":"2015-04-26T08:31:14","slug":"publication-in-journal-impact","status":"publish","type":"page","link":"https:\/\/www.ukm.my\/imen\/publications-2009\/publication-in-journal-impact\/","title":{"rendered":"Publication in Journal (Impact)"},"content":{"rendered":"

MEMS & Nanoelectronics Group<\/strong><\/p>\n

    \n
  1. Yunas, J., Hamzah, A.A. and Majlis, B.Y.<\/strong>, 2009. Fabrication and characterization of surface micromachined stacked transformer on glass substrate. Microelectronic Engineering 86 (10), pp. 2020-2025.<\/li>\n
  2. Dee, C.F., Lee, J.D., Sow, C.H., Majlis, B.Y.<\/strong>, Hamzah, A., Abdullah, H. and Lee, S.K., 2009. Simulation for deposition of ZnO thin film layer by kinetic Monte Carlo method. Materials Research Innovations 13 (3), pp. 135-138.<\/li>\n
  3. Ganji, B. A. and Majlis, B.Y.<\/strong>, 2009. High sensitivity and small size MEMS capacitive microphone using a novel slotted diaphragm. Microsystem Technologies 15 (9), pp. 1401-1406.<\/li>\n
  4. Tiong, T. Y., Yahaya, M., Dee, C. F., Lim, K.P., Majlis, B.Y. and Sow, C.H.<\/strong>, 2009. Influence of growth temperature on SnO2 nanowires. Materials Research Innovations 13 (3), pp. 203-206.<\/li>\n
  5. Karamdel, J., Ahmadi, M.T., Damghanian, M. and Majlis, B. Y., Dee, C. F., Ismail, R.<\/strong>, 2009. Analysis and simulation of carriers statistic for semiconducting single wall carbon nanotube. Materials Research Innovations 13(3), pp. 211-213.<\/li>\n
  6. Ganji, B. A. and\u00a0 Majlis, B.Y.<\/strong>, 2009. Fabrication and characterization of a new mems capacitive microphone using perforated diaphragm. International Journal of Engineering, Transactions B: Applications 22 (2), pp. 153-160.<\/li>\n
  7. Damghanian, M. and Majlis, B.Y.<\/strong>, 2009. Analysis and design of a wide micro beam as a pressure gauge for high sensitivity MEMS fingerprint sensors. Microsystem Technologies 15 (5), pp. 731-737.<\/li>\n
  8. Tehranirokh, M., Majlis, B.Y. and Bais, B.<\/strong>, 2009. Design and simulation of a normally closed glucose sensitive hydrogel based microvalve. Microsystem Technologies 15 (5), pp. 753-762.<\/li>\n
  9. Ganji, B.A. and Majlis, B.Y.<\/strong>, 2009. Design and fabrication of a novel single-chip MEMS capacitive microphone using slotted diaphragm. Journal of Micro\/Nanolithography, MEMS, and MOEMS 8 (2), art. No. 021112.<\/li>\n
  10. Yunas, J., Hamzah, A.A. and Majlis, B.Y.<\/strong>, 2009. Surface micromachined on-chip transformer fabricated on glass substrate. Microsystem Technologies 15 (4), pp. 547-552.<\/li>\n
  11. Ganji, B.A. and Majlis, B.Y.<\/strong>, 2009. Design and fabrication of a new MEMS capacitive microphone using a perforated aluminium diaphragm. Sensors and Actuators, A: Physical 149 (1), pp. 29-37.<\/li>\n
  12. Mitra Damghanian and Burhanuddin Yeop Majlis<\/strong>, 2009. Novel design and fabrication of high sensitivity MEMS capacitive sensor array for fingerprint imaging. Journal of Advanced Materials Research Vol. 74 (2009), pp 239-242.<\/li>\n
  13. Muhamad Ramdzan Buyong, Norazreen Abd Aziz and Burhanuddin Yeop Majlis<\/strong>, 2009. Characterization and optimization of seals-off for Very Low pressure sensors (VLPS) fabricated by CMOS MEMS process. Journal of Advanced Materials Research Vol. 74 (2009), pp 231-234.<\/li>\n
  14. Fatimah Lina Ayatollahi and Burhanuddin Yeop Majlis<\/strong>, 2009. Materials design and analysis of low-power MEMS microspeaker using magnetic actuation technology. Advanced Materials Research 74:243-246.<\/li>\n
  15. Rosminazuin Ab. Rahim, Badariah Bais, Burhanuddin Yeop Majlis<\/strong>, Hybrid Simulation Approach on MEMS Piezoresistive Microcantilever Sensor for Biosensing Applications, Advanced Materials Research Vol. 74 (2009) pp 283-286.<\/li>\n
  16. Norazreen Abd Aziz, Muhamad Ramdzan, Burhanuddin Yeop Majlis<\/strong>,\u00a0 Process characterization of wet etching for high aspect ratio microneedles development,\u00a0 Advanced Materials Research Vol. 74 (2009) pp 341-344.<\/li>\n
  17. N. A. Dzulkefli, B. bais and B. Y. Majlis<\/strong>, Fabrication of Glucose Sensitive Actuator for DDS Micro valve, Advanced Materials Research Vol. 74 (2009) pp 287-290.<\/li>\n
  18. Gebeshuber I.C., Stachelberger H., Ganji B.A., Fu D.C., Yunas J. and Majlis B.Y<\/strong>. Exploring the innovational potential of biomimetics for novel 3D MEMS”, Adv. Mat. Res. 74:\u00a0 265-268, doi:10.4028\/www.scientific.net\/AMR.74.265.<\/li>\n
  19. Tiong T.Y., Yahaya M., Dee C.F., Lim K.P., Majlis B.Y., Sow C.H<\/strong>. Influence of growth temperature on SnO2 nanowires. Materials Research Innovations Vol.\u00a0 13 Issue 3 (1.230).<\/li>\n
  20. Srajer J., Majlis B.Y. and Gebeshuber I.C<\/strong>. Microfluidic simulation of a colonial diatom chain reveals oscillatory movement. Acta Bot. Croat. 68(2): 431-441.<\/li>\n
  21. Hashim, U; Fatah, MFAA; Ahmad, I & Majlis, BY<\/strong>. 2009. Statistical Design of Ultra-Thin SiO2 for Nanodevices. Sains Malaysiana 38(4):553-557.<\/li>\n
  22. Ganji B.A. & Majlis B.Y<\/strong>. 2009. Design and fabrication of a novel single-chip MEMS capacitive microphone using slotted diaphragm. Journal of Micro-Nanolithography, MEMS and MOEMS 8(2): art. no. 021112.<\/li>\n
  23. Bahram Azizollah Ganji & Burhanuddin Yeop Majlis<\/strong>. 2009. Fabrication of deep trenches in silicon wafer using deep reactive ion etching with aluminum mask. Sains Malaysiana 38(6): 889-894.<\/li>\n
  24. Tomala A., Werner W.S.M., Gebeshuber I.C., Doerr N. &\u00a0 Stoeri H<\/strong>. 2009. Tribochemistry of monomolecular lubricant films of ethanolamine oligomers. Tribology International 42(10): 1513-1518.<\/li>\n
  25. Gebeshuber I.C., Gruber P. and Drack M<\/strong>. 2009. A gaze into the crystal ball – biomimetics in the year 2059. Proc. IMechE Part C: J. Mech. Eng. Sci. 50st Anniversary Issue, pp. 2899.<\/li>\n
  26. Tomala A., Werner W.S.M., Gebeshuber I.C., Doerr N. and Stoeri H<\/strong>. 2009. Tribochemistry of monomolecular lubricant films of ethanolamine oligomers. Tribology International 42(10): 1513-1518.<\/li>\n
  27. Zika T., Gebeshuber I.C., Buschbeck F., Preisinger G. & Groeschl M<\/strong>. 2009. Surface analysis on rolling\u00a0 bearings after exposure to defined electric stress. Proc.\u00a0 IMechE,\u00a0 Part\u00a0 J: J.Engineering Tribology, 223(J5) :787-797.<\/li>\n
  28. Gebeshuber I.C., Holzer D., Goschke R., Aumayr F. and Stoeri H<\/strong>. 2009. Development of an atomic force microscope closed fluid cell for tribological investigations of large samples in chemically aggressive environments. Proc. IMechE, Part J: J. Engineering Tribology. 223(J5): 759-765.<\/li>\n
  29. Fatimah Lina Ayatollahi & Burhanuddin Yeop Majlis<\/strong>. 2009. Materials Design and Analysis of Low-Power MEMS Microspeaker Using Magnetic Actuation Technology. NEMS\/MEMS Technology and Devices: Advanced Materials Research 74: 243-246.<\/li>\n
  30. Norazreen Abd Aziz, Muhamad Ramdzan Buyong & Burhanuddin Yeop Majlis<\/strong>. 2009. Process Characterization of Wet Etching for High Aspect Ratio Microneedles Development. Advanced Materials Research 74: 341-344.<\/li>\n
  31. Muhamad Ramdzan Buyong, Norazreen Abd Aziz & Burhanuddin Yeop Majlis<\/strong>. 2009.Characterization and Optimization of Seals-Off for Very Low Pressure Sensors (VLPS) Fabricated by CMOS MEMS Process. Advanced Materials Research 74: 231-234<\/li>\n<\/ol>\n

    Photonics and Nanophotonics Technology Group<\/strong><\/p>\n

      \n
    1. P. S. Menon, K. Kandiah, A. A. Ehsan & S. Shaari<\/strong>, 2009. The development of a new responsivity prediction model for In(0.53)Ga(0.47)As interdigitated lateral PIN photodiode. Journal of Optical Communications 30(2): 2-6.<\/li>\n
    2. Abang Annuar Ehsan, Sahbudin Shaari, and Mohd Kamil Abd Rahman<\/strong>, “1×2 y-branch plastic optical fiber waveguide coupler for optical access-card system,” Progress In Electromagnetics Research, PIER 91, pp. 85-100, 2009.<\/li>\n
    3. Abang Annuar Ehsan, Sahbudin Shaari and Mohd Kamil Abd. Rahman<\/strong>, 2009. Low Cost 1 X 2 Acrylic-based Plastic Optical Fiber Coupler with Hollow Taper Waveguide. PIERS ONLINE\u00a0 5(2): 129-132<\/li>\n
    4. T. Eltaif, H. M. H. Shalaby, S. Shaari, and M. M. N. Hamarsheh<\/strong>, “Performance enhancement of successive interference cancellation scheme based on spectral amplitude coding for optical code-division multiple-access systems using Hadamard codes,” SPIE Opt. Eng., vol. 48(4), pp. 045002(1-7), Apr. 2009.<\/li>\n
    5. T. Eltaif, H. M. H. Shalaby, S. Shaari, and M. M. N. Hamarsheh<\/strong>, 2009. Performance analysis of a hybrid fiber Bragg grating-based spectral-amplitude-coding\/successive interference cancellation for optical CDMA systems,” Opt. Commun., vol. 282(1), pp. 1-6, Jan. 2009.<\/li>\n
    6. Mohd Sharizal Alias, Sahbudin Shaari, P. K. Choudhury, and Sufian Mitani<\/strong>, 2009. Improved efficiency of GaAs-based VCSEL by utilizing fan-pad metallization and trench patterning”, Laser Physics vol. 19(11), pg. 2096-2101.<\/li>\n
    7. Mohd Sharizal Alias, Sahbudin Shaari, P. K. Choudhury, and Sufian Mitani<\/strong>, 2009. Comprehensive uniformity analysis of GaAs-based VCSEL epiwafer by utilizing the on-wafer test capability,” Journal of Russian Laser Research, vol. 30(4), pg. 368-375.<\/li>\n
    8. T Eltaif, H M H Shalaby, S Shaari, & M. M. N. Hamarsheh<\/strong>, 2009. Successive Interference Cancellation for Optical CDMA Systems: Fundamental Principles,” WSEAS Transactions on Communications. Vol. 8(7), pp. 668-677.<\/li>\n
    9. Ehsan, A.A., Shaari, S., Rahman, M.K.A., Abidin, K.M.R.K.Z<\/strong>, 2009. Hollow optical waveguide coupler for portable access card system application\u00a0 Journal of Optical Communications 30 (2), pp. 67-73<\/li>\n
    10. Fuad A. Hatim, Feras N. Hasoon and S. Shaari<\/strong>, 2009. Effects of Nonlinear Stimulated Brillouin Scattering on Performance Analysis of an Optical CDMA Transmission System. Journal of Optical Communications 30(2), pp. 104-108.<\/li>\n
    11. Hesham A. Bakarman, Sahbudin Shaari, and Mahamod Ismail<\/strong>, Security Performance of Spectral Amplitude Code OCDMA: a Spectrally Encoded Pulse Bandwidth Effects. Journal of Optical Communications 30(4): 242-247<\/li>\n
    12. Bakar, A.A.A., Mahdi, M.A., Al-Mansoori, M.H., Shaari, S., Zamzuri, A.K<\/strong>, 2009. Single-stage gain-clamped L-band EDFA with C-band ASE saturating tone. Laser Physics 19 (5), pp. 1026-1029.<\/li>\n
    13. Bakar, A.A.A., Mahdi, M.A., Al-Mansoori, M.H., Shaari, S., Zamzuri, A.K<\/strong>, 2009. Opto-optical gain-clamped L-band erbium-doped fiber amplifier with C-band control signal. Applied Optics 48 (12), pp. 2340-2343.<\/li>\n
    14. H.Abdullah, M.N.Norazia, S.Shaari, A.Amir Khadum<\/strong>, 2009. Effect of heat treatment on the structural, morphological and optical properties of tin-Doped ZnO (x=0.0 and x=0.05) thin films Defect and Diffusion Forum 293: 53-61<\/li>\n
    15. Ali Z. Ghazi Zahid, Feras N. Hasoon, Sahbudin Shaari<\/strong>, 2009. New Algorithm for Enhanced Double Weight (EDW) Code for Spectral Amplitude Coding.\u00a0 Journal of Optical Communications 30(3): 206-210<\/li>\n
    16. A. A. Ehsan and S. Shaari<\/strong>, 2010. Metal-based 1×2 and 1×4 asymmetric plastic optical fiber couplers for optical code generating devices. Progress In Electromagnetics Research, PIER 101: 1-16<\/li>\n
    17. Mohd Sharizal Alias, Sahbudin Shaari, Paul O. Leisher, and Kent D. Choquette<\/strong>, 2010.\u00a0 Single transverse mode control of oxide VCSEL by photonic crystal and trench patterning. Photonics and Nanostructures: Fundamentals and Applications<\/li>\n
    18. M. S. Alias, S. Shaari, and S. M. Mitani<\/strong>, 2010. Optimization of electro-optical characteristics of GaAs-based oxide confinement VCSEL.\u00a0 Laser Physics 20(4): 1-5<\/li>\n<\/ol>\n

      Microelectronic Semiconductor Packaging Group<\/strong><\/p>\n

        \n
      1. S.Abdullah, M.F.Abdullah & A.K.Ariffin<\/strong>, 2009, Thermal-Mechanical Analysis of a Different Leadframe Thickness of Semiconductor Package under the Reflow Process Americal Journal of Applied Sciences. Vol 6 (4): 616-625<\/li>\n
      2. S. Abdullah, M.F. Abdullah, A.K. Ariffin and A. Jalar<\/strong>, 2009, Effect of Leadframe Oxidation on the Reliability of a Quad Flat No-Lead Package, Journal of Electronic Packaging 131: 031002-1 – 031002-7.<\/li>\n
      3. M.F. Rosle, I. Abdullah, S. Abdullah, M.A.A. Hamid, A.R. Daud and A. Jalar<\/strong>. 2009. Effect of Manufacturing Stresses to Die Attach Film Performance in Quad Flatpack No-Lead Stacked Die Packages. American Journal of Engineering and Applied Sciences, Vol. 2 : 17-24<\/li>\n
      4. Nowshad Amin, Lim, V., Foong, Chee Seng, Rozaidi Razid & Ibrahim Ahmad<\/strong>. 2009. A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages. Microelectronics Reliability 49: 537-543.<\/li>\n
      5. N. Saud and A.Jalar<\/strong>. 2009.\u00a0 Sn-Rich phase coarsening during isothermal annealing for as-soldered Sn-Ag-Cu solders, J Mater Sci: Mater Electron, DOI 10.1007\/s10854-009-0032-z (Online)<\/li>\n
      6. Zainudin Kornain, Azman Jalar, Rozaidi Rasid and Fong Chee Seng<\/strong>. 2009. Effect of Curing Profile to Eliminate the Voids \/ Black Dots Formation in Underfill Epoxy for Hi-CTE Flip Chip Packaging. Journal of World Academy Science, Engineering and Technology, Vol 59 : 374-379<\/li>\n
      7. Norliza Ismail, Muhammad Azmi Abdul Hamid & Azman Jalar<\/strong>. 2009. Microstructural Characterization of Au-In Thin Film Deposited by Electron Beam Evaporation. Sains Malaysiana vol 38(1) pp 91 \u2013 94<\/li>\n
      8. Siti Nurul Fatimah Hasim, Muhammad Azmi Abdul Hamid, Roslinda Shamsudin, Azman Jalar<\/strong>. 2009. Synthesis and Characterization of ZnO Thin Films by Thermal Evaporation. Journal of Physics and Chemistry of Solids 70 (2009). pp. 1501-1504<\/li>\n
      9. D.S. Che Halin, I. A. Talib, A. R. Daud & M. A. A. Hamid<\/strong>. 2009. Physical Properties Of Cuprous Oxide Thin Films Grown On N-Si Substrate By Sol-Gel Spin Coating, Sains Malaysiana, 38(2): 215\u2013218<\/li>\n<\/ol>\n

        Organic and Printed Electronics Group<\/strong><\/p>\n

          \n
        1. Umar A.A., Oyama M., Salleh M.M., Majlis B.Y<\/strong>. Formation of high-yield gold nanoplates on the surface: Effective two-dimensional crystal growth of nanoseed in the presence of poly(vinylpyrrolidone) and cetyltrimethylammonium bromide. Crystal Growth and Design Vol.9 Issue 6 (4.046).<\/li>\n
        2. M. Y. A. Rahman, A. Ahmad, L. H. C. Ismail, M. M. Salleh<\/strong>. 2009 Fabrication and Characterization of a Solid Polymeric Electrolyte of PAN-TiO2-LiCIO4 .Journal of Applied Polymer Science Vol 115,2144-2148<\/li>\n
        3. Rika, Ahmad A., Rahman M.Y.A., Salleh M.M. 2009<\/strong>. Preparation and characterization of PAN based solid polymeric electrolyte for dye-sensitized solar cells. Physica B: Condensed Matter, 404(8-11): 1359-1361.<\/li>\n
        4. Rika, Rahman M.Y.A., Salleh M.M., Umar A.A., Ahmad A<\/strong>. 2009. Synthesis and characterization of TiO2 nanoparticle films coated with organic dyes. Physica B: Condensed Matter, 404(8-11): 1420-1422.<\/li>\n
        5. Rajendra N.G., Akrajas, A., Oyama<\/strong>, M.2009. Comparison of spherical nanogold particles and nanogold plates for the oxidation of dopamine and ascorbic acid. J. Electroanalytical Chemistry 631: 58-61<\/li>\n
        6. Sepeai S., Salleh M.M., Yahaya M., Umar A.A<\/strong>. 2009. Improvement of white organic light emitting diode performances by an annealing process. Thin Solid Films, 517(16): 4679-4683.<\/li>\n
        7. Supriyanto, A., Triyana, K., Roto, Kusminarto, Salleh, M.M., Umar, A.A<\/strong>. 2009. Fabrication and performance studies of TiO2 and porphyrin heterojunction based organic photodetector. J. Optoelectronics & Advance Material. ISSN: 1454-4164<\/li>\n
        8. Tengku Hasnan Tengku Aziz, Muhamad Mat Salleh and Muhammad Yahaya<\/strong>, 2009. Enhanced Performance of Organic Light Emitting Devices Using Nanocomposite SiO2:PHF as an Emitting Layer. Solid State Science and Technology, 17(1):104-109. (Diindeks dalam Chemical Abstrak)<\/li>\n
        9. Umar A.A., Oyama M., Salleh M.M., Majlis B.Y<\/strong>. 2009. Formation of high yield gold nanoplates on the surface.Crystal Growth and Design, 9(6): 2835-2840.<\/li>\n
        10. Umar A.A., Oyama M<\/strong>. 2009. High-yield synthesis of tetrahedral-like gold nanotripods using an aqueous binary mixture of cetyltrimethylammonium bromide and hexamethylenetetramine. Cryst. Growth Des 9(2): 1146-1152<\/li>\n
        11. Yap C.C., Yahaya M., Salleh M.M<\/strong>. 2009. Influence of tetrabutylammonium hexafluorophosphate (TBAPF6) doping level on the performance of organic light emitting diodes based on PVK:PBD blend films. Current Applied Physics, 9(5): 722-726.<\/li>\n
        12. Yap C.C., Yahaya M., Salleh M.M<\/strong>. 2009. The effect of DCJTB concentration on the photoluminescent and electroluminescent properties of PVK-PBD-perylene-DCJTB thin films. Materials Science- Poland, 27(1): 209-218.<\/li>\n
        13. Yap C.C., Yahaya M., Salleh M.M<\/strong>. 2009. The effect of driving voltage on the electroluminescent property of a blend of poly(9-vinylcarbazole) and 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole. Current Applied Physics, 9(5): 1038-1041.<\/li>\n
        14. Abdullah, H. , Habibi Saadah, N.O.R. , Ariyanto, N. , Muhamad Salleh, M.A.T<\/strong>.\u00a0\u00a0 Low-doping effect on nanostructured ZnO:Al as anti-reflecting coating [Kesan pengedopan rendah ke atas bahan nanostruktur ZnO: Al sebagai lapisan anti-pantulan]. 2009. Sains Malaysiana Volume 38, Issue 5, October 2009, Pages 679-683<\/li>\n
        15. Ramli, N. , Muhamad Salleh, M.A.T. , Yahaya, M. , Jumalli, M.H.H.J<\/strong>.\u00a0\u00a0 Effect of ZrO2 addition on microstructure, morphology and pressure sensing behaviour of Pb(Zrx Ti1-x)O3 ceramics sintered in Al2O3 environment. 2009. Sains Malaysiana Volume 38, Issue 5, October 2009, Pages 685-691.<\/li>\n
        16. Abdullah, H. , Rini, A.S. , Ya, M.Z. , Yarmo, M.A<\/strong>. Structural and morphological studies of TiO2 films for dye-sensitized solar cell applications.2009. Diffusion and Defect Data. Pt A Defect and Diffusion Forum Volume 293, 2009, Pages 63-66<\/li>\n
        17. Dee, C.F., Lee, J.D. , Sow, C.H. , Majlis, B.Y. , Hamzah, A. , Abdullah, H. , Lee, S.-K<\/strong>.\u00a0 Simulation for deposition of ZnO thin film layer by kinetic Monte Carlo method.\u00a0 2009. Materials Research Innovations,\u00a0 Volume 13, Issue 3, September 2009, Pages 135-138<\/li>\n
        18. Tiong, T.Y. , Yahaya, M. , Dee, C.F. , Lim, K.P. , Majlis, B.Y. , Sow, C.H.<\/strong>,\u00a0\u00a0 Influence of growth temperature on SnO2 nanowires.2009. Materials Research Innovations , Volume 13, Issue 3, September 2009, Pages 203-206<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"

          MEMS & Nanoelectronics Group Yunas, J., Hamzah, A.A. and Majlis, B.Y., 2009. Fabrication and characterization of surface micromachined stacked transformer on glass substrate. Microelectronic Engineering …<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":295,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-322","page","type-page","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t